VueJect®

 

A versatile, high-tech pump developed by Bracco for Ultrasound Contrast Agent infusion. The VueJect® is a dedicated Ultrasound Contrast Infusion Pump.

Key VueJect® features include:

 

  • Limitation of maximum infusion pressure to prevent bubble destruction. 

 

  • Maintains the bubble in uniform suspension preventing bubble separation.
Vueject

 

1. Extension line Slit



Syringe Cradle
 

2. Tip holder
 

3. Flange clip

 

Front panel commands
 

4. Battery and Charge Indicators
 

5. PURGE Button
 

6. RESET Button
 

7. ON/OFF Button
 

8. Plunger

 

The VueJect® syringe pump is designed to deliver a suspension of ultrasound contrast agent in a continuous infusion mode and/or as a slow bolus.


The suspension is withdrawn into a syringe that is placed in the pump. During infusion or slow bolus the syringe is gently rotated to maintain the suspension. Infusion rates are programmable from 0.3 to 4.0 ml/min in 0.1 ml/min increments. Boluses can also be programmed. The pump operates on an internal rechargeable battery and can also be operated while attached to the battery charger.


All the operational buttons, and a display showing the pump status, are contained in a small remote control that can be fixed on or near the ultrasound machine keyboard.

 

 

 

Remote control
Vueject 2 remote control

1. START/STOP Button
 

2. BOLUS SETTING Button
 

3. ALARM RESET Button
 

4. START/STOP BOLUS Button
 

5. PLUS Button
 

6. MINUS Button
 

7. BATTERY Indicator

 

 

Accessories

 

Syringes


Use only disposable syringes approved for the VueJect® BR-INF 100 syringe pump.

Type: B.Braun Original-Perfusor® OPS 20ml Luer Lock ref 08728615.
Volume: 20 ml.

 

Extension line

 

Use only extension lines approved for the VueJect® BR-INF 100 syringe pump.

Type:Baxter Micro-Volume ref # 2N3345 or Sidam extension set ref # 01011568.
Length: 91-92 cm.

Internal diameter: 0.5 mm.

Model identification BR-INF 100
Syringe size 20 ml (see list of accessories)
Infusion flow rate range 0.3 to 4.0 ml/min in 0.1 ml/min increments
Bolus flow rate range 0.3 to 4.0 ml/min in 0.1 ml/min increments
Bolus duration range 0 to 120 sec. in 1-second increments
Flow rate accuracy ± 2% by volume as measured using the trumpet curve test method defined in IEC 60601-2-24:1998 at all rates, under normal conditions and backpressure conditions
Maximum volume infused 19.5 ml
Minimum volume to start the pump 4 ml
Maximum time available for one infusion 65 min
Purge 0.35 ml at 4 ml/min
Syringe cradle rotation 30 cycles per minutes, 1 cycle goes from -160° to +160°
Maximum pressure limit threshold calculated according to flow rate. Always lower than 0.8 bar (11.6 PSI, 600 mmHg) at any flow rate, for the recommended syringes and extension lines
Maximum time for occlusion 20 sec. at 0.3 ml/min, 3 sec. at 2.0 ml/min, 1 sec. at 4.0 ml/min
Critical occlusion volume 0.025 ml (maximum volume expelled after release of the occlusion)
Input requirement 15V DC, 0.4 A
Battery type Rechargeable sealed lead acid. Expected life: 350 complete cycles
Battery operating time 8 hours of operation at 0.3 ml/min following full charge. Charge indication after system checking when pump is turned on
Battery charging time approx. 12 hours from empty to 80% charge, approx. 16 hours from empty to 100% charge
Pump size 33.7 x 14.5 x 10.1 cm (13.3" x 5.7" x 4.0")
Remote control size 14.5 x 8.5 x 2.3 cm (5.7" x 3.3" x 1") with a 150 cm (59") cable
Weight 3.9 Kg (8.6 lb.) including remote control and cable
Materials Pump main body: Polyoxymethylene (POM) and Polyethylene terephthalate (PETP)
Pump cover: Polymethylmethacrylate (PMMA)
Pump bottom cover: Polymethylmethacrylate (PMMA)
Remote control body: Acrylonitrile Butadiene Styrene ABS
All buttons and displays: Polycarbonate
All anti-slit pads: Polyurethane

 

 

Environmental Conditions Operating Transport/storage
Temperature +5°C +40°C -40°C +70°C
Relative humidity 20% 90% 10% 100%
Atmospheric pressure 700hPa-1060hPa 500hPa-1060hPa

Contact us

Please fill out the form below and we will get back to you.

Different countries may have specific processes in place to handle reports of adverse reactions. To report an adverse reaction related to Bracco products, you can find specific contacts and information selecting the page "Pharmacovigilance" of your country.

I have read and I agree with the Bracco Privacy Policy

* I have read the BraccoHealthCare Professionals Privacy Notice and I consent to the processing of my personal data allowing Bracco Imaging SpA (Data Controller) to conduct its business or scientific operations and contact me with promotional communication through email, SMS, and other digital and offline channels, such as mobile apps and social media.

DISCLAIMER


For any product or type of product, whether a drug or device, referenced in this website, physicians should carefully review the product's package insert, instructions for use, or user manual prior to patient administration to ensure proper utilization of the product. The Core Summaries of Product Characteristics for the main Bracco Imaging products are available on-line. However, please consult your full locally approved information before using.